Hi, iam Barbara Elliott, Have a blessed day.
Hey there! Looking to fix that rubber windshield of yours? Well, you’ve come to the right place! Let’s get started - it’s a piece of cake. First things first, you’ll need to get your hands on some rubber cement. Once you have that, it’s just a matter of patching up the cracks and tears in your windshield. Don’t worry - it won’t take long. Just be sure to take your time and do a thorough job; otherwise, you’ll be back at square one! So go ahead and give it a shot - I’m sure you can handle it like a pro!
How Do I Fix The Rubber On My Windshield? [Solved]
Alright, you need a thin line of sealer in the gap between the glass and rubber. After it’s set in the car, just squeeze some sealer into the space between the rubber gasket and frame. Make sure to get it deep down there - do it in stages so you don’t overdo it. Let one layer settle before adding more - that way you’ll get a good seal!
Inspect the windshield: Carefully inspect the windshield for any cracks or chips that may need to be filled in before attempting to fix it.
Clean the area: Use a glass cleaner and a soft cloth to clean the area around the rubber sealant, ensuring that all dirt and debris is removed from the surface.
Apply adhesive: Apply an adhesive designed specifically for rubber windshields around the edges of the sealant, making sure to cover all areas evenly and completely.
Allow time to dry: Allow enough time for the adhesive to dry completely before attempting to move or adjust it in any way.
Reattach rubber sealant: Carefully reattach the rubber sealant back onto its original position on your windshield, pressing down firmly until it is secure in place again.
Check for leaks: Once you have reattached your rubber sealant, check for any leaks by running water over it and looking closely at where it meets your windshield frame for any signs of water seeping through or around it
Fixing a rubber windshield is pretty straightforward. You just need to get the right supplies and you’re good to go. First, grab some rubber cement and a razor blade. Then, clean the area around the crack with rubbing alcohol and let it dry. Next, apply a thin layer of rubber cement to both sides of the crack and let it dry for about 10 minutes. Finally, use your razor blade to trim away any excess rubber cement that’s sticking out from the crack - voila! You’ve fixed your rubber windshield!
